Question 1

Which method will you use for surface treatment?

Accepted Answer

We supply multiple methods for making the products based on customer's quantity, favor, and choice, including oxidation, electrophoretic coating, powder coating, fluorocarbon coating, wood grain etc...

Question 2

What's the thickness for anodizing? Can you do 15um?

Accepted Answer

Our normal thickness is about 10 um. Yes, we can do 15um and above.

Question 3

What color you can do for powder coating? The thickness of the powder coat?

Accepted Answer

We can do any color for powder coat as long as you can provide the color sample. Our normal powder coating thickness is 60-80um.

Question 4

What color you can do for wood grain?

Accepted Answer

Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do them according to the color samples you provide.

Question 5

How's the weather resistance for wood grain finish D1010?

Accepted Answer

§  Powder: Akzo Noble Interpon D1010. 
§  Wood grain film: Italian Memphis. 
§  Standard complied: American AAMA Standard.2603 
§  UV test:1000 hours. 
§  Salt spraying test:1000 hours. 
§  Normal weather: 10 years color guarantee.

Question 6

What color you can do for powder coating? The thickness of the powder coat?

Accepted Answer

We can do any color for powder coat as long as you can provide the color sample. Our normal powder coating thickness is 60-80um.

Yinsheung

Yinsheung

Yinsheung